Note 00: While Mhz is used and is accruate due to crystal used, in reaility it should be called msps (million samples per second) as the actual effective sampling is half the mhz number.
Links to buy a CX Card White Variant / Green Variant / Blue Variant Where to find current PCIe 1x CX2388x cards & notes: Note! You shouldn't load both drivers at the same time. Video, digital video, audio and the other normal features of these chips. The regular cx88 driver in Linux provides support for capturing composite Today the cheap PCIe (with 1x bridge chip) capture card market uses these chips at 25-35USD prices per card, directly from China. Note! cx23885 and cx23888 are incompatible chips. The new driver configures the CX2388x to capture in its raw output mode in 8-bit or 16-bit unsigned samples from the video input ports, allowing these cards to be used as a low-cost 28-54mhz 10bit ADC for SDR and similar applications. If you do not get audio directly from the WinTV card, it would unfortunately indicate a faulty audio circuit on the WinTV, and therefore would require the board to be replaced.Cxadc is an alternative Linux driver for the Conexant CX2388x series of video decoder/encoder chips used on many PCI TV tuner and capture cards. If you do- there would be a problem with the sound card configuration or a hardware problem with the LINE-IN. You should get audio (although low) this way. If all of this is done, and there is still no AUDIO from the WIN/TV card, try connecting your PC speakers(powered speakers only) or a set of headphones directly to the WIN/TV board. In the WinTV 2000 Application, click the AUD button for the audio configuration dialogue (or configure/audio in WinTV32), be sure that the MIXER-ID list shows "Line-in", and that the volume is up.Īlso, in the sound card volume configuration (under PROGRAMS- ACCESSORIES-ENTERTAINMENT-VOLUME CONTROL), be sure that the LINE-IN section is not on MUTE (as it commonly is on default) and that the volume is up.
NOTE: On systems that do not have an actual "line in", substitute "Auxiliary"(AUX), or "Microphone"(Mic) for the configuration procedures below. First, be sure that the supplied audio cable is connected from the WinTV card to the Sound Cards LINE-IN.
0 kommentar(er)
